Remove debris
Leaves and sediment reduce working capacity and can block the outlet. Clear only from a safe position or use a trained technician.
Maintenance guide
Before a heavier-rain period, check the complete roof-edge route: clear debris, inspect joints and outlets, confirm downpipes discharge correctly, and look for roof or flashing defects. Maintenance reduces overflow risk but cannot repair a failed roof detail by itself.
Updated 13 July 2026 · Written by Cheong Seng, established in 1986.
Quick answer
A safe ground-level check can catch leaves, rust, open joints, sagging, cracked sealant and downpipe blockage. If the roof is high or wet, do not climb it—send photos to a professional and arrange a safe inspection.
Practical checklist
Leaves and sediment reduce working capacity and can block the outlet. Clear only from a safe position or use a trained technician.
Look for open seams, corrosion, drips or staining below the gutter line.
Confirm discharge is clear and look from the ground for loose tiles, lifted flashing, cracked sealant or water marks.
Practical checklist
If the gutter overflows after cleaning, check fall, profile, outlet spacing and roof catchment.
Many leaks across a run may justify a new stainless steel gutter or redesigned outlet route.
A wall, valley, extension or flat slab leak needs the roof detail or waterproofing checked.
FAQ
These answers explain what can be checked from photos and when an on-site inspection is needed.
Inspect before heavier rain periods and after storms when overflow or visible blockage occurs; the useful interval depends on trees and roof type.
Do not climb a wet or unstable roof. Use a qualified technician when ladder access, height or roof hazards are involved.
No. Roof tiles, flashing, joints, downpipes and waterproofing still need their own diagnosis.
Contact Cheong Seng
Send the property area, roof or gutter photos, and when the problem appears. Cheong Seng can advise the next inspection or repair step.
+60 12-323 6603